DEDICATED PRESSURE SYSTEMS LTD.

Telephone 01372 803 675
Fax 01372 803 678
Email dps@heatweb.com
 
Internet http://www.heatweb.com

The Institute of Plumbing

R/O Shops, 9-19 Manor Green Road, Epsom, Surrey KT19 8RA
  

Installation Instructions
Rapid-Electric Stowaway Heat Bank Thermal Store

4010-1  05/07/01

Heat Bank Thermal Store System  
Stowaway advanced F+E  
28 Plate Heat Exchanger (45+ ltr/min)  
Electrically heated  
Immersion Heater Relays  
50mm Foam Insulation  
All fitted controls are wired  
Manual Fill - No Overflow  
Thermostatic Blending Valve 22mm  
Full Low Water Level Cut-Out  
Central Overheat Protection  
Cased  


1   Integral Expansion Vessel (Unpressurised)
2   Plate Heat Exchanger
3   Heat Exchanger Pump
4   Flow Switch
5   Thermostatic Blending Valve, Mixcall III
6   Manual Air Vent
7   Automatic Air Vent
8   Integral Overflow Chamber
9   Store Filling Point
11  Y-Pattern Strainer (supplied loose)
13  Connection to Expansion Vessel
14  Boost Immersion Heater 3kW Incaloy with Stat
15  Economy Immersion Heater 3kW Low Noise with Stat
16  Cold Mains In, 22mm
17  Hot Mains Out, 22mm
18  Drain Cock
39  White Coated Steel Casing
40  Tight Fitting Lid
42  Wiring Centre with 3 x 3m Power Leads
54  Filling Loop (disconnect after use)
55  Water Level Switch
56  Manual Water Level Test and Drain
66  Overfill Drain Cock

 

Unit ID

SC-250-4010-1

Capacity

250

Base Diameter

450

Overall Diameter

550

Height

1900

Contents:
1. Introduction
2. General Requirements
3. Mains Water Supply
4. Connections:
5. Wiring
6. Filling
7. Commissioning
8. Fault Finding
9. Servicing
10. Spares
11. User Instructions